Re. DOWNLOAD and INSTALLATION of BOS PACK
Cantains BOS, DupSoft, BridgeScorer Control and Scorer firmware; and a range of
other programs
The software package is comprehensive (70
MB) and you must let the download be completed before you start the
installation. Start
download now.
FIRST TIME INSTALLATION
1. Locate the downloaded bospackage.zip
2. Unzip it
3. Open the bospackage
folder
4. Double-click setup.exe
5. Leave the defaults as is and accept
all installations

See page 2 in the Manual
if you have any problems with this. (A shortcut to the manual will be put on
your Desktop by the installation program).
Quickstart instruction for BridgeScorers
Demo mode
DupSoft
will run in demo mode until you connect BridgeScorers,
Duplimate or HandyDup. This
means that you cannot generate new deals with DupSoft,
but you can run all functions with the Demo event.
B. UPGRADE OF OLD INSTALLATION
If you upgrade an older installation,
please follow these instructions:
¥ Any
previously installed "Duplimate
package" must be uninstalled BEFORE you install the BOS
package. c.f. page 2-3 in the
Manual.
¥ The
firmware of each and all BridgeScorers
must be upgraded BEFORE you can use them with the new software. c.f. the BridgeScorer memo.